LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> SQ5 Premium Plus >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Exterior Body Panels (Hood, Lids) >> 55 Hood, Lids >> Hood >> Hood Release Lever, Removing And Installing >> Release Lever Cover, Removing

Release Lever Cover, Removing

Fig 1: Identifying Operating Lever Cover, Removal
GWWA55-10301Courtesy of AUDI OF AMERICA, LLC
  1. >>A-Pillar<< Lower Trim
  2. Hood Release Lever Cover
    • First disengage the cable from the coupling inside the engine compartment. Refer to CABLE COUPLING .
    • Pry the clip out of the hood release lever.
    • Remove the cover sideways from the operating lever.
  3. Release Lever
  4. Clip
    • Press in completely, it must engage.
scientia non olet · About LEMON Manuals