Rear Lid Tail Lamp, Removing And Installing: Installing

Fig 1: Installing Light Housing

Courtesy of AUDI OF AMERICA, LLC

• Tightening specification, refer to OVERVIEW - REAR LID TAIL LAMPS .

Install In Reverse Order Of Removal. Note The Following: 

• The cable grommet -2- must sit correctly in its mount -3-.
• The self-adhesive seal -1- between the rear lid and the tail lamp housing must seal correctly.

-- Tighten the nuts for the tail lamp, refer to Figure.

Fig 2: Identifying Rear Lid Lamp Nuts

Courtesy of AUDI OF AMERICA, LLC