Headlamp Housing Inner Bracket, Removing And Installing: Removing

Fig 1: Locating/Removing Expanding Clips At Lock Carrier Cover

Courtesy of AUDI OF AMERICA, LLC

-- To remove the expanding clips -arrows-, carefully push the pin -1- to dimension -x- until it audibly engages into the expanding clip -arrow A-.

• Dimension -x- = 5 mm.

-- Remove the unlocked expanding clip -2- and the pin.

-- Lift the lock carrier cover -3- and engage it on the radiator grille.

-- Remove the bolts -arrows-.

Fig 2: Removing Headlamp Housing Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bracket -1- upward from the headlamp housing -2-.