Overview - Timing Chain Cover: Notes
WARNING: This page does not describe the selected car, but rather 11 other vehicles, including the 2016 Audi A4 Quattro, 2016 Audi A4, 2015 Audi A4 Quattro, 2015 Audi A4, and 2014 Audi A4 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- O-Ring
- Always replace after removing
- Coat with oil before installing
- Oil Dipstick Tube
- Bolt
- 9 Nm
- Bolt
- 9 Nm
- Camshaft Adjustment Valve 1 -N205-
- Removing and installing. Refer to Camshaft Adjustment Valve 1 - N205-, Removing and Installing .
- Seal
- Replace if damaged
- Coat with oil before assembly
- Bolt
- Tightening sequence. Refer to Figure
- Upper Timing Chain Cover
- Removing and installing. Refer to Figure.
- Seal
- Replace if damaged.
- O-Ring
- Always replace after removing
- Lubricate with engine oil
- Alignment Pins
- Centering the cover
- Lower Timing Chain Cover
- Always replace after removing
- Removing and installing. Refer to LOWER TIMING CHAIN COVER, REPLACING .
- Bolt
- Tightening sequence. Refer to Figure
- Always replace after removing
- Seal
- For the vibration damper
- Replacing. Refer to VIBRATION DAMPER SEALING RING, REPLACING .
- Plug
- Always replace after removing