LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (4.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CEUA, CGTA, CTFA & CTGA) >> 15 Cylinder Head, VALVETRAIN >> Valvetrain >> Valve Stem Seals, Removing And Installing >> Valve Shaft Seals, Removing And Installing, Cylinder Removed >> Assembling

Valve Shaft Seals, Removing And Installing, Cylinder Removed: Assembling

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in the reverse order of disassembly, noting the following:

-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.

-- Install the camshafts, refer to INSTALLING .

scientia non olet · About LEMON Manuals