LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (4.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CEUA, CGTA, CTFA & CTGA) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain, Removing And Installing >> Procedure

Camshaft Timing Chain, Removing And Installing: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the lower timing chain cover, refer to LOWER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- Remove the camshaft timing chains from the camshafts, refer to REMOVING .

CAUTION:

If the running direction is reversed on a used camshaft timing chain, it could be damaged.

  • Paint arrows to mark the timing chain running direction so it can be installed again.