LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 564 (4.0L - Cylinder Head & VALVETRAIN - Engine Code(S): CEUA, CGTA, CTFA & CTGA) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Camshaft Timing Chain Tensioner, Removing And Installing >> Removing

Camshaft Timing Chain Tensioner, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Chain Tension And Camshaft Timing Chain
GWWA15-11249Courtesy of AUDI OF AMERICA, LLC

-- Remove the camshaft timing chains from the camshafts, refer to REMOVING .

-- Remove bolts -1- and -2- and remove the left chain tension and left camshaft timing chain.

-- Remove bolts -1- and -2- and remove the right chain tension and right camshaft timing chain.

Fig 2: Identifying Chain Tension And Camshaft Timing Chain
GWWA15-11250Courtesy of AUDI OF AMERICA, LLC