Overview - Front Wheel Housing Liner
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 2.5 Nm
- Inner Front Wheel Spoiler
- Removing and installing, refer to FRONT INNER WHEEL SPOILER, REMOVING AND INSTALLING .
- Quick Release
- Bolt
- 2.5 Nm
- Metal Nut
- For the quick release
- Front Outer Wheel Spoiler
- There are different versions .
- Removing and installing, refer to OUTER FRONT OUTER WHEEL SPOILER, REMOVING AND INSTALLING .
- Nut
- 2.5 Nm
- Quantity: 2
- Bolt
- 2.5 Nm
- Quantity: 6
- Front Section of Front Wheel Housing Liner
- Removing and installing, refer to FRONT WHEEL HOUSING LINER FRONT SECTION, REMOVING AND INSTALLING .
- Bracket
- For the wheel housing liner to the fender
- Bolt
- 2.5 Nm
- Bracket
- For the wheel housing liner to the fender
- Bolt
- 2.5 Nm
- Nut
- 2.5 Nm
- Quantity: 4
- Bolt
- 2.5 Nm
- Quantity: 2
- Rear section of front wheel housing liner
- Removing and installing, refer to FRONT WHEEL HOUSING LINER REAR SECTION, REMOVING AND INSTALLING .
- Quick Release
- Quantity: 6
- Bolt
- 2 Nm