Rear Final Drive 0BE and 0BF in the Audi A8

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

In the Audi A8 from My 2010 two different versions of rear final drive are installed, Rear Final Drive 0BF or 0BE.

The rear final drive 0BE is an enhanced version and is installed exclusively with the V8 TDI Engine.

Production date
The engine, manual transmission and automatic transmission allocation using the code letters and the PR numbers

Rear Final Drive			0BF
Code Letters			MKV
Allocation	Engine		3.0L - 155 kW TDI 3.0L - 184 kW TDI 3.0L - 213 kW TFSI 3.0L - 245 kW TFSI 4.2L - 273 kW FSI 6.3L - 368 kW FSI
Ratio		Final drive Z₂ : Z₁	43 : 13 = 3.308
Driveshaft flange diameter			75.5 mm
Gear oil - capacity For rear final drive (differential and pinion) No replacement interval			Refer to 03 MAINTENANCE, DIAGNOSIS
Gear oil specification
ATF capacity For the hydraulic control unit and chambers No replacement interval			Refer to 03 MAINTENANCE, DIAGNOSIS
ATF specification

Rear Final Drive			0BE
Code Letters			MKL
Allocation	Engine		4.2L - 258 kW V8 TDI
Ratio		Final drive Z₂ : Z₁	36 : 13 = 2.769
Driveshaft flange diameter			68 mm
Gear oil - capacity For rear final drive (differential and pinion) No replacement interval			Refer to 03 MAINTENANCE, DIAGNOSIS
Gear oil specification
ATF capacity For the hydraulic control unit and chambers No replacement interval			Refer to 03 MAINTENANCE, DIAGNOSIS
ATF specification