LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> External Pages >> Different car >> Section 1602 (AIR CONDITIONING [R1234yf SERVICING] (TOOLS & TESTING EQUIPMENT) (CABRIOLET)) >> Air Conditioning >> Tools And Testing Equipment >> Tools And Materials, Obtainable From Distribution Center Or Importer

Tools And Materials, Obtainable From Distribution Center Or Importer

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Tools and materials can be obtained.

Overview
A/C service station with flushing device-- With program installed for flushing the refrigerant circuit using refrigerant R1234yf, and corresponding flushing equipment.-- With the analyzer installed to determine the contamination of refrigerant R1234yf.
Refrigerant R1234yf.
Extractor (for refrigerant R1234yf)- dry ice box.
VW/Audi - passenger vehicle adapter set. Refer to the Parts Information.-- To connect the A/C service station on the refrigerant circuit to flush and to bridge removed components when flushing.-- To connect specific components to a pressure hose to blow through with compressed air or nitrogen.
R1234yf/R134a leak detector.
Combined fine filter unit for compressed-air system (oil, dirt and water separator as used for painting facilities).
Seals (different versions, pay attention to the allocation).
Refrigerant oil (different versions, pay attention to the allocation).
Leak detection system with the following contents. Refer to the Parts Information.
  • Cleaning Solution
  • UV Leak Detection Lamp
  • Leak Detection Lamp - Replacement Bulb
  • Protective Eyewear
  • Sticker
  • Safety Gloves
  • System Case
Tracer refill cartridge.
Release tools for refrigerant line with quick-release coupling.
Removal tool for the refrigerant lines quick-release coupling.
Socket for removing and installing the valves.