Raising And Lowering With Open And Closed Air Suspension System

Raising

Before raising the vehicle using the hoist, activate "Lift" (highest level) and switch the "vehicle lift mode" on.

This ensures that the hoist lifting arms can pivot under the vehicle.

Lowering

-- Lower the vehicle onto its wheels.

-- Swing back hoist lifting arms.

-- Switch off "vehicle lift mode" and set desired driving mode.

NOTE:

"Vehicle lift mode" is automatically deactivated when vehicle speed exceeds 10 km/h.

If the hoist lifting arms cannot be swung back (insufficient pressure in pressure reservoir), allow engine to run at idle. This switches the air supply unit compressor on.

The air suspension system can also be filled in "Guided Functions". Refer to SYSTEM, VENTING OR FILLING .