LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S7 Prestige >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission System (Clutch - Service Information - 7-Speed Dual Clutch - 0B5 - 1 Of 2) >> 30 Clutch >> Clutch >> Overview - Flywheel And Dual Clutch >> Tightening Specifications

Tightening Specifications

Fig 1: Flywheel And Dual Clutch Tightening Sequence
GWWA30-10130Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in three steps in the sequence shown:

Step Bolts Tightening Specification
1. -1 to 5- Install by hand evenly until the bolt head contact the clutch cover.
2. -1 to 5- Tighten one after the other in 90° steps until the clutch cover contact the transmission housing.
3. -1 to 5- 10 Nm
scientia non olet · About LEMON Manuals