Input Shaft Ball Bearing, Replacing: Removing

Courtesy of AUDI OF AMERICA, LLC

-- Remove the dual clutch -1-. Refer to DSG CLUTCH, REMOVING .

-- Remove the locking ring -arrow- from the removed clutch cover.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the dual clutch ball bearing.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

There may still be a thrust washer -2- behind the ball bearing -3- depending on the clutch cover date of manufacture. If there is, then replace the old one with a new one when installing the new ball bearing.

Courtesy of AUDI OF AMERICA, LLC

Replace the ball bearing -3-.