Cam Actuator, Removing And Installing: Removing

Cylinder Bank 1 (Right): 

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

Cylinder Bank 2 (Left): 

-- Open the clamps -1 and 4- and remove the coolant hoses.

-- Free up the coolant hose -arrow-.

-- Disconnect the connector -2-.

-- Remove the bolt -3-.

-- Remove the coolant reservoir upward from the mount and move it towards the front.

Continued for Both Sides: 

-- Disconnect the connector -2-.

-- Remove the bolt -1- and then remove the cam actuator.