Right Timing Chain Cover, Removing And Installing: Removing
-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .
-- Remove the vacuum pump. Refer to HYDRAULIC SYSTEM .
-- Remove the bolts -1 and 2-.
Danger of causing damage to the coolant pipe.
- Do not bend the coolant pipe.
-- Remove the rear upper coolant pipe from the right cover for the timing chain guard in direction of -arrow- and set it aside.
The catalytic converter and the turbocharger support are removed to improve the clarity of the illustration.
Ignore item -2-.
-- Open the clamp -1- and remove the coolant hose.
-- Disconnect the connectors -1 and 2-.
-- Remove the bolts -arrows- and move the mount -3- and wiring harness to the side.
-- Remove the bolts in the following sequence: -8 to 1- counter-clockwise as shown.
-- Carefully remove the right cover for the timing chain from the bond.