Continued for Both Sides

Installation is performed in reverse order of removal, while noting the following:

-- Install the engine support and the right engine mount. Refer to RIGHT ENGINE MOUNT, REMOVING AND INSTALLING .

-- Install the wires. Refer to RELAY CARRIERS, FUSE PANELS AND E-BOXES and the Appropriate Wiring Diagram.

-- Install the front bumper cover. Refer to FRONT BUMPER .

-- Install the left front Knock Sensor 3 -G198-. Refer to Knock Sensor 3 -G198-, REMOVING AND INSTALLING .

-- Install the camshafts. Refer to CAMSHAFT, REMOVING AND INSTALLING .

-- Install the turbocharger. Refer to TURBOCHARGER, REMOVING AND INSTALLING .

-- Change the engine oil.

-- Replace the coolant. Refer to COOLANT, DRAINING AND FILLING .