Cylinder Head Bank 2 (Left), Removing
Special tools and workshop equipment required
- Engine Support Bridge :10-222A
- Engine Support - Bracket w/Spindle and Hook :10-222A/10
- Engine Crane Adapter - Bracket :T10013
- Threaded pin of Engine Support Bracket :T10338
- Engine Support - Basic Set :T40091
- Engine Support - Supplement Kit :T40093A with :T40093/7 , and :T40093/8
- Commercially available XZN M12 socket, minimum 75 mm long
- Sealant.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview and parts information prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Cylinder Head to Cylinder Block
- O-ring - Front Coolant Pipe to Cylinder Head
- Cylinder Head Gasket - Cylinder Head to Cylinder Block