Wire Routing And Securing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
- Mark the individual fuel, hydraulic and vacuum lines for the Evaporative Emission (EVAP) canister system as well as the electrical wires before disconnecting and/or removing them. This will prevent a mix-up when reconnecting them. Draw a sketch or take a picture of them if necessary.
- Due to the limited space inside the engine compartment, be especially careful when working near moving or hot parts to avoid damaging the lines.