Supercharger Ribbed Belt, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2016 Audi S4, 2015 Audi S5, and 2015 Audi S4. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Place the ribbed belt over the pulley as illustrated:
- Tensioner
- Supercharger
- Idler Roller
- Vibration damper
NOTE:
When installing the ribbed belt, make sure it is seated correctly on the pulleys.
-- Start the engine and check the belt routing.
-- Install the noise insulation. Refer to NOISE INSULATION, REMOVING AND INSTALLING .