Flange Shaft Ring

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2016 Audi S5, 2015 Audi S5, 2015 Audi RS 5, and 2014 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools and workshop equipment required

Thrust Plate VW 401
Thrust Plate VW 402
Thrust Disc VW 412
Sleeve 40 - 21
Seal Press Sleeve 2003/1 from the Seal Installer 2003
Press Tool 3345
Separating Device 22 to 115 mm, for example Kukko 17/2

Fig 1: Identifying Ring -A- To Flange Shaft, Removal

Courtesy of AUDI OF AMERICA, LLC

B - Separating Tool 22 to 115 mm, for example Kukko 17/2

Fig 2: Carefully Install Ring -A- Onto Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

Ring installed position -A- : the larger outer circumference on the ring faces the 3345.