Overview - Instrument Panel

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Exploded View Of Instrument Panel Assembly

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 1.5 Nm
- Quantity: 3
Light Switch -E1-
- Removing and Installing. Refer to ROTARY LIGHT SWITCH -EX1-, REMOVING AND INSTALLING .
Headlamp Range Control Adjuster -E102-
- Removing and Installing. Refer to HEADLAMP RANGE CONTROL ADJUSTER -E102-, REMOVING AND INSTALLING .
Bolt
- 3 Nm
- Quantity: 6
Frame
- For the instrument cluster
- Removing and Installing. Refer to INSTRUMENT CLUSTER FRAME, REMOVING AND INSTALLING .
Left Side Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Bolt
- 3 Nm
- Quantity: 2
Bolt
- 3 Nm
- Quantity: 2
Nut
- Quantity: 6
- 0.5 Nm
  NOTE:
  Tighten the nuts carefully to prevent the mounting pins on the speaker trim from shearing off.
Mount
- For speaker
- Removing and Installing. Refer to SPEAKER MOUNT, REMOVING AND INSTALLING .
Mid-Treble Speaker
- Equipped on some models
- Removing and installing. Refer to CENTER SPEAKER, REMOVING AND INSTALLING .
Side Speaker Trim
- Equipped on some models
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, SIDE SPEAKER TRIM .
Nut
- 0.5 Nm
- Quantity: 6
  NOTE:
  Tighten the nuts carefully to prevent the securing pins on the defroster vent from shearing off.
Sunlight Photo Sensor -G107-
- Removing and installing. Refer to SUNLIGHT PHOTO SENSOR -G107-, REMOVING AND INSTALLING .
Center Speaker Trim
- Equipped on some models
- Removing and Installing. Refer to SPEAKER TRIM, REMOVING AND INSTALLING, CENTER SPEAKER .
Upper Center Defroster Vent
- Removing and Installing. Refer to FRONT CENTER DEFROSTER VENT, REMOVING AND INSTALLING .
Mid-Treble Speaker
- Equipped on some models
- Removing and installing. Refer to CENTER SPEAKER, REMOVING AND INSTALLING .
Upper Side Defroster Vent
Bolt
- 3 Nm
- Quantity: 2
Instrument Panel
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Note the allocation of the airbag to the instrument panel. Refer to the Parts Information.
- Removing and Installing. Refer to INSTRUMENT PANEL, REMOVING AND INSTALLING .
Right Side Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, SIDE INSTRUMENT PANEL VENT .
Front Passenger Airbag
WARNING:
- Follow all safety precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Note the allocation of the airbag to the instrument panel. Refer to the Parts Information.
- Overview. Refer to OVERVIEW - FRONT PASSENGER AIRBAG .
- Deactivating and activating possible using the key switch
- Removing and Installing. Refer to FRONT PASSENGER AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING .
Nut
- Tightening specification OVERVIEW - FRONT PASSENGER AIRBAG
Bolt
- 3 Nm
MMI Screen
- Removing and Installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
Cover
- For MMI screen
- Removing and Installing. Refer to MMI SCREEN COVER, REMOVING AND INSTALLING .
Center Instrument Panel Vent
- Removing and Installing. Refer to INSTRUMENT PANEL VENT, REMOVING AND INSTALLING, CENTER INSTRUMENT PANEL VENT .
Radio/Navigation System
- Equipped on some models
- Removing and installing. Refer to RADIO, REMOVING AND INSTALLING .
- Frame, Removing and Installing. Refer to RADIO/NAVIGATION SYSTEM FRAME, REMOVING AND INSTALLING .
Front Information Display Control Head Module -J523-
- Removing and installing. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
Bolt
- Tightening specification. Refer to COMPONENT LOCATION OVERVIEW - INFOTAINMENT SYSTEM .
Climatronic Control Module -J255-
- Removing and installing. Refer to DISPLAY AND CONTROL HEAD -J255-, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to OVERVIEW - INSTRUMENT CLUSTER .
Bolt
- 3 Nm
Trim
- For Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to ACCESS/START AUTHORIZATION SWITCH TRIM, REMOVING AND INSTALLING .
Access/Start Authorization Switch -E415-
- Removing and Installing. Refer to ACCESS/START AUTHORIZATION SWITCH -E415-, REMOVING AND INSTALLING .
Instrument Cluster
- Removing and installing. Refer to OVERVIEW - INSTRUMENT CLUSTER .
Light Switch Trim
- Removing and Installing. Refer to LIGHT SWITCH TRIM, REMOVING AND INSTALLING .