LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S6 Premium Plus >> Repair and Diagnosis >> Engine Mechanical >> Blowers, Superchargers & Turbochargers >> Turbocharger System (Service Information - CEUC, CTGE) >> Turbocharger, Supercharger >> Charge Air System >> Charge Air Cooler Housing, Removing And Installing >> Installing

Charge Air Cooler Housing, Removing And Installing: Installing

Install in reverse order of removal. Note the following: 

NOTE:

Replace the seals

Secure all hose connections with hose clamps of the same type as those equipped by the factory. Refer to the Parts information.

-- Install the Throttle Valve Control Module -J338-. Refer to Throttle Valve Control Module -J338-, REMOVING AND INSTALLING .

-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

NOTE:

Do not reuse used coolant.

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

scientia non olet · About LEMON Manuals