Monitor-ID $71: Secondary air system ((Bank 1))
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Mode 6: Check test the results of components that are not continuously monitored".
Select "Monitor-ID 113 ".
-- Select the desired "Test-ID (TID)" or "Hex-ID".
-- Check specified values at idle.
| Test-ID (TID) | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $91 | P2440 | Secondary air valve, bank 1, Diagnose Stuck open valve | 0% | 15% | Refer to DTC P2440 in the DTC summary table. Engine Control Module --, 2013 - 2014 MY |
| $92 | P0491 | Secondary air valve, bank 1, Checking air stream | 0 kg/h | 21 kg/h | Refer to DTC P0491 in the DTC summary table. Engine Control Module --, 2013 - 2014 MY |
-- If any of components or systems fail to meet the specified values. Refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.