INNER CV JOINT, 100 mm DIAMETER OR 108 mm DIAMETER: Notes

Special Tools And Workshop Equipment Required

Fig 1: Driving Cover Down With Copper Or Brass Drift

Courtesy of AUDI OF AMERICA, LLC

-- Secure the drive axle with protective covers in a vise clamp.

-- Drive cover down with copper or brass drift.

Fig 2: Secure Drive Axle With Protective Covers In A Vise Clamp

Courtesy of AUDI OF AMERICA, LLC

-- Only open and remove the "small" protective boot clamp.

-- Remove circlip.

Fig 3: Opening Clamps And Pulling Off CV Joint Boot From Inner Joint

Courtesy of AUDI OF AMERICA, LLC

-- Remove the inner CV joint from the drive axle using the special tools illustrated.

Fig 4: Pressing CV Joint Off Of Drive Axle

Courtesy of AUDI OF AMERICA, LLC

-- Remove the CV joint boot from the drive axle.