INNER CV JOINT, 100 mm DIAMETER OR 108 mm DIAMETER WITH CAP: Notes

Special Tools And Workshop Equipment Required 

• Torque wrench:V.A.G 1331 
• CV joint boot clamp tool:3340 
• CV joint boot clamp tool:V.A.G 1682 
• Thrust plate:VW 401 
• Thrust plate:VW 402 
• Punch:VW 408 A 
• Support sleeve:VW 522 
• Circlip pliers (commercially-available)
• Copper or brass drift
• Sealant. Allocation, refer to the Parts Information..