LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S5 2D Convertible >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension (Front Axle - Drive Axle) (Cabriolet) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Installed Position And Tightening Sequence:

Installed Position And Tightening Sequence:

Fig 1: Installing Diagonal Brace (-Arrow- Faces Direction Of Travel)
GWWA40-10375Courtesy of AUDI OF AMERICA, LLC

-- Install the diagonal brace (-arrow- faces the direction of travel).

-- First tighten the bolts to 5 Nm in sequence -1, 2 and 3- and then tighten them to the final Tightening Specification. Refer to -item  ) OVERVIEW - SUBFRAME, A5 FROM 09/2007 - Bolt.

Tightening Specifications. Refer to OVERVIEW - SUBFRAME .

scientia non olet · About LEMON Manuals