Seat belts, inspecting
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2008 Audi S4, 2008 Audi RS 4, 2008 Audi A4, 2007 Audi S4, and 2007 Audi RS 4. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
After every accident the seat belt system must be inspected systematically! If damage is determined when inspecting the check points, customer must be informed regarding necessity of changing belts.
Check points:
- Check belt webbing
- Check retractor (locking function)
- Visual inspection of belt buckle
- Belt buckle function test
- Check belt guide rings and locking tongue
- Check securing components and anchorage points
NOTE:
- If customer refuses to have a damaged seat belt replaced, appropriate note should be made in service book.