LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S5 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 1312 (Crankshaft, Cylinder Block (Servicing) [CABB, CABA, CABD, CAEA, CAEB, CDHB, CDNB, CDNC, CDHA, CDZA, CADA, CCUA, CFKA, CPMA, CAED, CPMB, CHJA, CPEA] (Cabriolet)) >> Crankshaft, Cylinder Block >> Pistons And Connecting Rod >> Piston And Cylinder Bore, Checking >> Checking Piston Ring Grove Clearance

Checking Piston Ring Grove Clearance

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi A5 Quattro, 2016 Audi A5 Quattro, 2015 Audi A5 Quattro, 2014 Audi A5 Quattro, and 2014 Audi A5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Checking Piston Ring Grove Clearance
GWWN13-10569Courtesy of AUDI OF AMERICA, LLC

-- Clean the piston ring groove before checking.

Piston Ring Gap in Connection with the Two-Piece Oil Scraping Ring Dimensions in mm New Wear Limit
1. Compression ring 0.06 to 0.09 mm 0.20 mm
2. Compression ring 0.03 to 0.06 mm 0.15 mm
Oil Scraping Ring Cannot be measured
Piston Ring Gap in Connection with the Three-Piece Oil Scraping Ring Dimensions in mm
1. Compression ring Cannot be measured
2. Compression ring Cannot be measured
Oil Scraping Ring Cannot be measured