Overview - Timing Mechanism Drive Chain: Notes
WARNING: This page is about a different car, the 2012 Audi S5, 2011 Audi S5, 2010 Audi S5, 2009 Audi S5, and 2008 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Guide Rail
- Bolt
- 10 Nm + 90° turn
- Always replace
- Bolt
- 22 Nm
- Drive Chain Sprocket Thrust Washer
- Drive Sprocket for Left Timing Chain
- Bolt
- 10 Nm + 90° turn
- Always replace
- Power Take-Off Drive Chain
- Removing and installing. Refer to TIMING MECHANISM DRIVE CHAIN, REMOVING AND INSTALLING .
- Guide Rail
- Bolt
- 10 Nm + 90° turn
- Always replace
- Bolt
- 9 Nm
- Mounting Pin for the Drive Chain Sprocket
- For the right camshaft timing chain
- Asymmetrical version
- Installed position. Refer to Figure
- Thrust Washer
- Drive Sprocket for Right Timing Chain
- Mounting Pin for the Drive Chain Sprocket
- Bolt
- 42 Nm
- O-ring
- Always replace
- Chain Tensioner
- Bolt
- 5 Nm + 90° turn
- Always replace
- Crankshaft
- Bolt
- 10 Nm + 90° turn
- Always replace