LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S5 2D Convertible >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> GENERIC SCAN TOOL [CGXC, CTUA, CTUB, CTUC, CTUD] (5 Of 5) (CABRIOLET) >> Generic Scan Tool >> Diagnosis And Testing >> Diagnostic Modes 01 - 0A >> Diagnostic Mode 04 - Erase DTC Memory >> Procedure

Diagnostic Mode 04 - Erase DTC Memory: Procedure

-- Connect the scan tool.

-- Switch the ignition on.

-- Select Diagnostic Mode 03: Interrogating fault memory.

-- Then select Mode 4: Reset/delete diagnostic data.

The scan tool will display "Diagnostic data being erased".

-- Switch the ignition off.

scientia non olet · About LEMON Manuals