Headrest Cover And Cushion, Removing And Installing: Installing

-- Insert the cushion -1- with the correct shape into the cover -2-.

-- Insert the headrest support in the cushion with the cover.

-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.

Fig 1: Closing Main Lock

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Slide the edge of the fabric edge with the flat channel into the U-channel -5-.

-- Closing the side zippers is similar to the closing the main zipper.

-- After closing the main zipper and the side zippers with a needle or other pointed object, line up the cover and the profiles.

-- Ensure the cover sits on the cushion -3- without any wrinkles or seam markings.

Further installation is the reverse order of removal.