Overview - SUBFRAME Mount
NOTE:
The illustration show the assembly mounts in a vehicle with a TDI engine.
- 1 -
Bolt
- Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 2 -
Engine Support
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 3 -
Engine Mount
- With support arm
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 4-7 -
Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 8 -
Pendulum Support
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 9-13 -
Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 14 -
Transmission Mount
- With support arm
- Removing and installing. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 15 -
Bolt
- Tightening specification. Refer to tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT 2.0L or OVERVIEW - ASSEMBLY MOUNTS 2.0L DIESEL .
- 16 -
Bolt
- 40 Nm +90° turn
- Always replace after removing
- 17 - Transmission Support
- 18 -
Bolt
- 40 Nm +90° turn
- Always replace after removing