Overview - Bevel Box

Fig 1: Exploded View Of Bevel Box

Courtesy of AUDI OF AMERICA, LLC

Bolt
- Tightening specification -item 3- : Bolt
Heat Shield
- For drive axle
Bolt
- Tightening specification. Refer to DRIVE AXLE HEAT SHIELD, REMOVING AND INSTALLING .
Bolt
- Tightening specification. Refer to OVERVIEW - DRIVESHAFT .
Heat Shield
- For driveshaft
Bolt
- Tightening specification. Refer to OVERVIEW - DRIVESHAFT .
Bevel Box
- Removing. Refer to BEVEL BOX, REMOVING .
- Installing. Refer to BEVEL BOX, INSTALLING .
Bolt
- Tightening specification. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
- Always replace after removing
Bracket
- For bevel box
- There are different versions. Refer to the Parts Information for the correct allocation.
Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .
Bolt
- Tightening specification and sequence. Refer to BEVEL BOX, TIGHTENING SPECIFICATION .