Replacement Part Package
- Dual Clutch
- With locking ringCAUTION:
Risk of discs in double clutch slipping.
- Do not disassemble the double clutch.
- The drive plate (upper part of the clutch) of a new clutch is not secured with the circlip, it only sits "taut" in the clutch.
- The drive plate must be engaged between the teeth of the exterior clutch pack.
- If the drive plate is loosened, the clutch discs in the clutch can slip out of place and the clutch may not be correctly set during installation under certain circumstances.
- Removing. Refer to DUAL CLUTCH, REMOVING
- Installing. Refer to DUAL CLUTCH, INSTALLING
- With locking ring
- Circlips
- Quantity: 10, different thicknesses for adjusting clutch
- Determine thickness when installing the clutch. Refer to DUAL CLUTCH, INSTALLING
- Clutch End Cover
- Shaft Ring
- For clutch end cover