Wheel Electronics System (Tire Pressure Monitoring System), BERU

Special Tools And Workshop Equipment Required

Torque Wrench 1410:VAG1410 and Torque Wrench 1410 Insert - Accessory Kit:VAG1410/1

Courtesy of AUDI OF AMERICA, LLC

WARNING:

If tire sealant was used, then the wheel electronics on that particular wheel must be replaced.

WARNING:

Damaged wheel electronics must be replaced.

-- Push the wheel electronics -1- into the bed.

Courtesy of AUDI OF AMERICA, LLC

-- Install on the valve from the back with a microencapsulated screw

NOTE:

Replace the microencapsulated screw.

Tighten the microencapsulated screw to 4 Nm on all models.

Tightening specification for all models: 4 Nm