Storage Net, Adding In The New Center Console
Special tools and workshop equipment required
- Pop Rivet Nut Pliers: VAS 5072A
- Drill (angle drill or angle brace attachment)
- 3.5 mm diameter drill bit
- Protective Eyewear
NOTE:
As an original component the center console is delivered without a storage net.
For vehicle versions with a storage net the storage net must be installed in the new center console, as described as follows.
Procedure
-- Lay the center console on a stable, clean surface.
WARNING:
There is a risk of eye injury.
- Wear protective eyewear.
-- Stamp out the inner impressions -arrows- on the center console openings for the storage net 3.5 mm diameter, as shown.
-- Install the storage net. Refer to STORAGE NET, REMOVING AND INSTALLING .
-- Install the center console. Refer to CENTER CONSOLE, REMOVING AND INSTALLING .