Pedestrian Protection Trigger 1 -G598- / Pedestrian Protection Trigger 2 -G599-, Removing And Installing: Removing
Follow all safety precautions when working on pyrotechnic components. Refer to SAFETY PRECAUTIONS WHEN WORKING WITH PYROTECHNIC COMPONENTS .
-- Disconnect the battery ground cable with the ignition turned on. Refer to BATTERY, DISCONNECTING AND CONNECTING .
Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". For example, this can be done by briefly touching the door striker.
-- Remove the plenum chamber cover. Refer to OVERVIEW - PLENUM CHAMBER COVER / PLENUM CHAMBER COVER, REMOVING AND INSTALLING .
-- Press the release to disconnect the pedestrian protection trigger connector -1- and free it up.
-- Unscrew the nut and remove the clip -2- with a screwdriver.
-- Remove the nut -4- and remove the pedestrian protection trigger -3- from the mounting pins.