LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (GENERAL, TECHNICAL DATA [4-Cylinder 2.0L 4V TFSI Engine] -- (A3)) >> 00 General, Technical Data >> Safety Precautions >> Safety Precautions When Working On Ignition System

Safety Precautions When Working On Ignition System

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:

Risk of Injury Due to Electrocution 

When the engine is running the ignition system is under high-voltage. It is possible to be electrocuted by touching the ignition system.

-- Never touch or remove the ignition wires when the engine is running or at cranking speed.

CAUTION:

Risk of Damaging the Components 

Washing the engine as well as connecting and disconnecting wires when the engine is running can damage components.

-- Switch off the ignition before connecting and disconnecting wires.

-- Switch off the ignition before washing the engine.