Camshaft Adjustment Valve 1 - N205-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .
-- Free up the wires -1 and 3-.
-- Remove the bolts -arrows- and push the coolant line -2- to the left side.
-- Disconnect the connector -2-.
-- Remove the bolts -1- and the Camshaft Adjustment Valve 1 -N205-.