Continue If The Valve Timing Is Correct

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the :3359 and :T10490 .

-- Turn the crankshaft two turns in direction of engine rotation until the crankshaft is just before "TDC" again.

-- Check the valve timing once again. Refer to TOOTHED BELT, REMOVING FROM CAMSHAFT .

CAUTION:

- Never use the camshaft positioning tool as a counterholder.

-- If the camshaft driver can now be locked, tighten the camshaft toothed belt sprocket bolt -1- to the final tightening specification, to do so remove the : 3359 and counterhold the camshaft toothed belt sprocket using the : T10172A and :T10172/11 .

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nuts -2- for the high pressure pump toothed belt gear all the way. Refer to OVERVIEW - HIGH PRESSURE PUMP . Use the :T10051 to do this.

-- Check the valve timing once again. Refer to TOOTHED BELT, REMOVING FROM CAMSHAFT .