Turbocharger, Removing And Installing [CRBC, CRLB, CLHA, CRBD, CUNA, CRKB, CRUA, CRLC, CXXB, DBKA, DBGA, DEJA, DEJB, DGCA, DCYA, DDYA]: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Hose Clip Pliers:VAS6362
- Socket Bit XZN 10:T10501
- Hook Tool:T40207
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- O-ring - Resonator
- Nuts - Turbocharger
- Gasket - Turbocharger
- O-rings - Oil lines
If Mechanical Damage (for Example a Destroyed Compression Wheel) Is Found on the Turbocharger, Just Replacing the Turbocharger Is Not Enough. To Avoid Subsequent Damage Later, Perform the Following Steps:
- Check the air filter housing, air filter element and air duct hoses for contamination.
- Check the entire charge air circuit and charge air cooler for foreign objects.
- If there are foreign objects in the charge air system, clean the charge air circuit and replace the charge air cooler if necessary.