Lower Timing Chain Cover, Replacing: Removing

• Engine oil drained. Refer to ENGINE OIL .

-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .

-- Remove the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING (1.8L; 2.0L 4V TFSI) / ENGINE SUPPORT, REMOVING AND INSTALLING (4-Cylinder 2.0L 4V TFSI) .

-- Remove the vibration damper. Refer to VIBRATION DAMPER, REMOVING AND INSTALLING .

-- Remove the ribbed belt tensioner. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

-- Free up the clip -2- for the wiring harness.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1-.

-- Unclip the oil dipstick tube from the upper timing chain cover in direction of -arrow-.

-- Disconnect the connector -1- for the Oil Pressure Regulation Valve -N428-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 15-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the lower timing chain cover from the bonding.