LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> S3 Prestige >> Repair and Diagnosis >> External Pages >> Different car >> Section 115 (Cylinder Head, VALVETRAIN [CZPB, CZRA, DBFB] -- (A3)) >> 15 Cylinder Head, VALVETRAIN >> Chain Drive >> Overview - Camshaft Timing Chains >> Bearing Bracket - Tightening Specifications And Sequence

Bearing Bracket - Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA15-11860Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the steps shown in the sequence:

Step Bolts Tightening Specifications
1. -1 to 6- Install by hand all the way
2. -1 to 6- 9 Nm
scientia non olet · About LEMON Manuals