Bearing Bracket, Removing And Installing: Notes
WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Assembly Tool:T10352
- Assembly Tool:T10352/1A
- Assembly Tool :T10352/2
- Assembly Tool:T10352/3
- Assembly Tool:T10352/4
- Chain Tensioner Lever:T40243
- Wrench - 21mm:T40263
- Tensioner Locking Tool:T40267
- Adapter:T40314
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Plug - Lower timing chain cover
- Bolts - Cylinder head
Depending on the version of the control valve, use one of the tools listed: