Overview - Battery, Battery In Engine Compartment

Fig 1: Battery, Battery In Engine Compartment Exploded View

Courtesy of AUDI OF AMERICA, LLC

1. Retaining Bracket
2. Bolt
   • 15 Nm
3. Positive Cable
   • Disconnecting and connecting. Refer to BATTERY IN ENGINE COMPARTMENT, REMOVING AND INSTALLING .
4. Nut
   • 6 Nm
5. Heat Protection Sleeve
6. Positive Terminal Cover
7. Negative Terminal Cover
8. Electrical Wire
   • For the Battery Monitoring Control Module -J367-
   • Follow the sequence when connecting the ground cable. Refer to Connecting 
9. Nut
   • Tightening Specification. Refer to Wiring Diagram.
10. Ground Cable
    • 9 Nm
11. Ground Cable
    • Market-specific with Battery Monitoring Control Module -J367-
    • Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING, ENGINE COMPARTMENT BATTERY .
    • Removing and installing. Refer to GROUND CABLE WITH Battery Monitoring Control Module -J367-, REMOVING AND INSTALLING, ENGINE COMPARTMENT BATTERY .
12. Nut
    • 6 Nm
13. Battery
    • Disconnecting and connecting. Refer to BATTERY, DISCONNECTING AND CONNECTING, ENGINE COMPARTMENT BATTERY .
    • Removing and installing. Refer to BATTERY IN ENGINE COMPARTMENT, REMOVING AND INSTALLING .
14. Battery Tray
    • For vehicles through 11/2013
    • For vehicles from 11/2013. Refer to Fig 2.
    • Removing and Installing. Refer to BATTERY TRAY, REMOVING AND INSTALLING .
15. Bolt
    • 9 Nm
    • Quantity: 3

Battery Tray from 11/2013 - Tightening Specifications

Fig 2: Battery Tray

Courtesy of AUDI OF AMERICA, LLC

1. Battery Tray from 11/2013
2. Nut - 9 Nm
3. Bolt - Tightening Specification. Refer to OVERVIEW - BATTERY, BATTERY IN ENGINE COMPARTMENT .
4. Bolt - Tightening Specification. Refer to OVERVIEW - BATTERY, BATTERY IN ENGINE COMPARTMENT .
5. Bolt - Tightening Specification. Refer to OVERVIEW - BATTERY, BATTERY IN ENGINE COMPARTMENT .