Overview - Front Backrest, Backrest Adjustment Motor

NOTE:

The cushion and cover are not shown for clarity.

Fig 1: Exploded View Of Front Backrest, Backrest Adjustment Motor

Courtesy of AUDI OF AMERICA, LLC

1. Adjustment Shaft
   • The threaded hole for the nut -8- must be cleaned, for example, with a thread tap.
   • Coat the threads on the adjustment shaft with locking fluid before installing the nut. Refer to the Parts Information.
2. Driver Backrest Adjustment Motor -V45-
   • Front passenger side: Front Passenger Backrest Adjustment Motor -V46-
   • Removing and Installing. Refer to DRIVER AND FRONT PASSENGER BACKREST ADJUSTMENT MOTOR Driver Backrest Adjustment Motor -V45- /Front Passenger Backrest Adjustment Motor -V46-, REMOVING AND INSTALLING .
3. Rivet
   • Quantity: 2
4. Bracket
5. Bolt
   • Always replace after removing
   • Clean the threaded hole for the bolt with a thread tap, for example
   • Use locking fluid when installing the bolt. Refer to Parts Information for the locking fluid.
   • 7.5 Nm
6. Backrest Frame
7. Washer
8. Nut
   • Always replace after removing
   • 8 Nm