Overview - Bumper Cover, S Line And S3 From My 2017

Fig 1: Exploded View Of Bumper Cover (A3 S Line And S3 From MY 2017)

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 2.5 Nm
2. Bumper Cover End Plate
   • Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, A3 FROM MY 2017, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
3. Trim
   • Removing and Installing. Refer to TRIM, REMOVING AND INSTALLING, A3 S LINE FROM MY 2017 .
4. Center Air Intake Grille
   • Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A3 S LINE FROM MY 2017 .
5. Towing Eye Cover
6. Bumper Cover
   • Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
7. Cap
   • For the trim
8. Mount
9. Bolt
   • 4 Nm
10. Mount
    • For the bumper cover
    • To secure the headlamp
    • Overview. Refer to OVERVIEW - FENDER .
11. Bolt
    • Tightening specification. Refer to OVERVIEW - FENDER .
12. Bolt
    • 4.5 Nm
13. Bolt
    • 2 Nm
14. Intermediate Piece
    • For securing the wheel housing liner
15. Washer Nozzle Cover
    • For the headlamp washer system
    • Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
16. Air Intake Grille
    • Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, VEHICLES FROM MY 2017 .
17. Bolt
    • 4.5 Nm
    • Quantity: 3