Overview - Bumper Cover, RS3 Sedan, RS3 SPORTBACK From My 2019

Fig 1: Exploded View Of Bumper Cover (RS3 Sedan)

Courtesy of AUDI OF AMERICA, LLC

1. Air Intake Grille
   • Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
2. Spoiler Lower Section
   • Removing and Installing. Refer to SPOILER LOWER SECTION, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
3. Cover Strip
   • Removing and Installing. Refer to COVER STRIP, REMOVING AND INSTALLING .
4. Bumper Cover End Plate
   • Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, A3 FROM MY 2017, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
5. Bolt
   • 2 Nm
   • Quantity: 3
6. Lower Molded Foam Part
   • Removing and Installing. Refer to FRONT BUMPER COVER END PLATE, REMOVING AND INSTALLING, A3 FROM MY 2017, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
7. Clip
   • Quantity: 4
8. Bumper Cover
   • With cover for the towing eye
   • Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
9. Thread Mount
   • For the bolt
10. Mount
    • For the bumper cover
    • To secure the headlamp
    • Overview. Refer to OVERVIEW - FENDER .
11. Molded Foam Part
    • Removing and Installing. Refer to MOLDED FOAM PIECE, REMOVING AND INSTALLING, RS3 .
12. Lower Reinforcement Brace
    • Removing and Installing. Refer to LOWER REINFORCEMENT BRACE, REMOVING AND INSTALLING, RS3 SPORTBACK THROUGH MY 2018 .
13. Bolt
    • 2 Nm
    • Quantity: 4
14. Side Molded Foam Part
    • Secured using a Christmas Tree™ fastener
15. Christmas Tree^™ Fastener
16. Bolt
    • 4 Nm
17. Frame
    • For the air intake pipe
18. Partition Grille
    • Removing and Installing. Refer to AIR INTAKE GRILLE TRIM, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
19. Trim
    • For the air intake grille
    • Removing and Installing. Refer to AIR INTAKE GRILLE TRIM, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
20. Clip
    • Quantity: 4
21. Expanding Rivet
    • Quantity: 4
22. Bolt
    • 2 Nm
23. Mount
    • For the side air intake
    • Removing and Installing. Refer to SIDE AIR INTAKE TRIM, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
24. Bolt
    • 2 Nm
    • Quantity: 4
25. Outer Trim
    • For the side air intake
    • Removing and Installing. Refer to SIDE AIR INTAKE TRIM, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
26. Inner Trim
    • For the side air intake
    • Removing and Installing. Refer to SIDE AIR INTAKE TRIM, REMOVING AND INSTALLING, RS3 SEDAN, RS3 SPORTBACK FROM MY 2019 .
27. Connecting Part
    • For the spoiler lower section
    • Cannot be ordered separately. Preparing for installation. Refer to Preparing the spoiler lower section for installation with new parts .
28. Washer Nozzle Cover
    • For the headlamp washer system
    • Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
29. Clip