Bumper Cover, Removing And Installing, A3 Without Side Auxiliary Radiator: Removing
-- Push in the front wheel and loosen the wheel housing liner in the area of the front bumper cover.
-- Place a drip tray under the coupling point for the washer fluid hose.
-- If necessary, remove the washer fluid hose -1- from the headlamp washer system pump -2- by pressing the release button.
-- Seal the hose coupling with clean plugs from the : VAS6122 .
-- If necessary, disconnect the connector -3- from the fog lamp.
-- Disconnect the central connector -4-.
-- Push the loosened wheel housing liner aside and remove the bolts -arrows-.
-- Remove the bolts -1 and 2-.
-- Disengage the side piece -3- from the front side panel -arrow- and remove the bumper cover forward with a second technician.
-- e-tron: disconnect the connector on the signature lighting.