Overview - Bracket On Right Fender
- Bracket
- For the fender
- Lower
- Removing and Installing. Refer to FENDER BRACE, REMOVING AND INSTALLING .
- Headlamp Bracket
- Dependent on the model. Refer to Parts Information.
- Bolt
- Tightening sequence. Refer to Fig 2.
- Quantity: 2
- Bolt
- 8 Nm
- Quantity: 2
- Fender
- Removing and Installing. Refer to FENDER, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Quantity: 2
- Longitudinal Member
- Right
Headlamp Bracket - Tightening Specification and Sequence
-- Tighten the bolts in the steps shown in the sequence:
| Step | Screws | Tightening Specification |
|---|---|---|
| 1. | -1- | Install by hand all the way |
| 2. | -2- | 8 Nm |
| 3. | -1- | 8 Nm |